A
-
Abadi Marand, Leila
Semi-Solid Rheocasting of Al-5Cu-1Ag High Strength Alloy [Volume 1, Issue 3, 2018, Pages 193-200]
-
Abbasi, Majid
Microstructure and Hardness Evaluation of Heat Treated Cast Steel by Eddy Current Nondestructive Method [Volume 1, Issue 3, 2018, Pages 149-160]
-
Abbasi, Majid
Solidification Microstructure of A390 Aluminum Alloy Manufactured by Squeeze Casting Process [Volume 2, Issue 1, 2018, Pages 1-10]
-
Abbasi, Majid
Effect of Squeeze Casting Parameters on Mechanical Properties and Wear Behavior of A356 Aluminium Alloy [Volume 2, Issue 4, 2019, Pages 263-273]
-
Abbasi, Majid
Energy Management in Steelmaking by Electric Arc Furnace Based on OLTC [Volume 4, Issue 1, 2020, Pages 51-67]
-
Abbasi, Majid
Effect of Manganese Content on the as Cast Microstructure of Nodular Cast Iron [Volume 4, Issue 4, 2021, Pages 203-213]
-
Abbasi, Majid
Effect of Inoculation and Casting Modulus on the as Cast Microstructure of Austenitic Manganese Iron with Nodular Graphite [Volume 5, Issue 1, 2021, Pages 19-30]
-
Abbasi, Majid
Investigation of Squeeze Casting Process Parameters for Metal Matrix Composite Fabrication from ZAMAK5 Alloy Reinforced with Alumina preform [(Articles in Press)]
-
Abbasi, seyed Mahdi
Effect of Solutionizing Heat Treatment Duration on the Microstructural Defects of CMSX-4 Single Crystal [Volume 6, Issue 2, 2022, Pages 143-155]
-
Abbasi, seyed Mahdi
The evaluation of thermomechanical and heat treatment parameters on the microstructure and tensile properties of Ti-6Al-2Sn-4Zr-2Mo-0.08Si alloy [(Articles in Press)]
-
Abbasi, Seyed Mahdi
Effect of Melt Holding Time on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 3, Issue 1, 2019, Pages 29-36]
-
Abbasi, Seyed Mahdi
Effect of Carbon Content on the Microstructure and Mechanical Properties of Hyness 25 Superalloy [Volume 4, Issue 3, 2020, Pages 137-143]
-
Abbasi, Seyed Mahdi
Effect of Crucible Type on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 6, Issue 1, 2022, Pages 3-8]
-
Abbasi, Seyed Mahdi
The Effect of Melt Holding Time and Vacuum Pressure on the High Temperature Fatigue Life of Ni Based Hastelloy X Superalloy [Volume 5, Issue 3, 2021, Pages 205-213]
-
Abbasian, Abbas
Investigation of Heat Treatment Methods on Microstructure and Hardness of Aluminum-Nickel Bronze Alloy (C95500) [Volume 3, Issue 4, 2020, Pages 247-257]
-
Abdi, Mohsen
The Effect of Inert Gas Injection Semisolid Process on the Structure and Hot Tearing Susceptibility of Al-4.3%Cu Alloy [Volume 3, Issue 1, 2019, Pages 1-10]
-
Abdi Bejandi, Ehsan
To Produce an Advanced Zamak5 Composite with a 3D-Open Cell Copper Foam by Casting Method [Volume 4, Issue 3, 2020, Pages 129-136]
-
Afrazideh, Mostafa
Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
-
Aghajani, Hossein
Semi-Solid Rheocasting of Al-5Cu-1Ag High Strength Alloy [Volume 1, Issue 3, 2018, Pages 193-200]
-
Aghajani, Hossein
An Investigation on Reduction of Insoluble Build-ups in the Inductor of Ductile Iron Pouring Machine [Volume 2, Issue 2, 2018, Pages 101-108]
-
Aghajani, Hossein
Investigation of Microstructure and Chemical Composition of Mg-Ag-Ce-Zr Cast Alloy (QE22) [Volume 3, Issue 4, 2020, Pages 237-245]
-
Aghazadeh, Ebrahim
The Effect of Silicon Content on the Graded Microstructure of Centrifugally Cast Al-Si Alloys [Volume 1, Issue 2, 2017, Pages 89-97]
-
Aghazadeh, Ebrahim
Establishment of Graded Hybrid Microstructure Through Centrifugal Casting of a Hypereutectic Al-Mg2Si Alloy [Volume 2, Issue 2, 2018, Pages 79-88]
-
Aghazadeh, Ebrahim
Effect of Magnesium Content on Functionally Graded Microstructure and Hardness of Centrifugally cast Al-20Si-XMg Composites [Volume 3, Issue 2, 2019, Pages 55-66]
-
Aghazadeh, Jamshid
Investigation of the effect of misorientation grain growth on the creep behavior of nickel-based GTD111DS superalloy [Volume 5, Issue 2, 2021, Pages 79-92]
-
Aghazadeh, Jamshied
Investigation of Heat Transfer Coefficients Effects in Directional Solidification of GTD111 Super-alloy [Volume 3, Issue 1, 2019, Pages 11-20]
-
Aghazadeh, Sayfolah
The Effect of Silicon Content on the Graded Microstructure of Centrifugally Cast Al-Si Alloys [Volume 1, Issue 2, 2017, Pages 89-97]
-
Aghazadeh, Sayfolah
Establishment of Graded Hybrid Microstructure Through Centrifugal Casting of a Hypereutectic Al-Mg2Si Alloy [Volume 2, Issue 2, 2018, Pages 79-88]
-
Aghazadeh, Sayfolah
Effect of Magnesium Content on Functionally Graded Microstructure and Hardness of Centrifugally cast Al-20Si-XMg Composites [Volume 3, Issue 2, 2019, Pages 55-66]
-
Ahmadi, Reza
Effect of Severe Plastic Deformation on Mechanical Properties and Microstructure of A520 Al-Alloy Produced by Semisolid and Ordinary Casting [Volume 1, Issue 1, 2017, Pages 9-21]
-
Akbari, Faezeh
Investigation of Effect of Mechanical Vibration During Solidification on Microstructure and Wear Properties of Zn-4Si Composite [Volume 6, Issue 1, 2022, Pages 53-65]
-
Akbari, Faezeh
Investigation of Effect of Mold Mechanical Vibration During Solidification on the Structure and Corrosion Resistance of Zn-4Si Alloy [Volume 6, Issue 2, 2022, Pages 157-167]
-
Akbarifar, Mehdi
Investigation of Oxide Film Characteristics in Al-Zn Melt by Oxide-Metal-Oxide Technique [Volume 3, Issue 3, 2019, Pages 131-140]
-
Akhondzadeh, Adli
Effect of Carbon Content on the Microstructure and Mechanical Properties of Hyness 25 Superalloy [Volume 4, Issue 3, 2020, Pages 137-143]
-
Akhondzadeh, Adli
Evaluation of the Effect of Carbon and Solution Treatment on the Microstructure and Mechanical Properties of ASTM F75 Cast Co Based Alloy [Volume 6, Issue 1, 2022, Pages 35-44]
-
Aliabadi, Mohsen
Investigating the Effect of Rapid Heating on Microstructure and Tensile Properties of Phosphorus Modified Alloy Al-Si-Cu-Mg [Volume 4, Issue 2, 2020, Pages 71-78]
-
Aliakbari Sani, Saeed
An Investigation in the Present Phases in a Cast Co-Al-W Cobalt-Base Superalloy Using Experimental Methods and JMatPro Software [Volume 2, Issue 1, 2018, Pages 27-37]
-
Alinejad, Hossein
Effect of As Cast Microstructure on Recrystallization and Recovery Processes of 2304 Duplex Stainless Steel [Volume 2, Issue 3, 2018, Pages 201-209]
-
Alireza, Mirak
Effect of directional solidification on the microstructure and mechanical properties of a 2th Generation Ni-base single crystal superalloy CMSX-4 [Volume 3, Issue 4, 2020, Pages 187-199]
-
Alishahi, Mostafa
Investigation of Mechanical Properties and in vitro Corrosion Rate of Open-Cell Cast Magnesium Foams [Volume 4, Issue 3, 2020, Pages 155-165]
-
Alizadeh, Mostafa
Investigating the Hot Tear Formation in Eutectic Al-Fe Alloys in Mushy Temperatures Ranges by Simulation of Solidification [Volume 3, Issue 2, 2019, Pages 101-112]
-
Alizadeh, Mostafa
Effect of Melt Shearing Time by Vertical Spiral Stirrer on Hot Tearing Behavior of A206 Alloy [Volume 6, Issue 1, 2022, Pages 23-34]
-
Amini, Ilia
To Produce an Advanced Zamak5 Composite with a 3D-Open Cell Copper Foam by Casting Method [Volume 4, Issue 3, 2020, Pages 129-136]
-
Amini, Kamran
Effect of Shot-Peening on the Wear Behavior of Two Types of High Manganese Austenitic Steel [Volume 1, Issue 2, 2017, Pages 121-132]
-
Amini, Saeid
The effect of surface severe plastic deformation on microstructure and mechanical properties of pure titanium produced by selective laser melting [(Articles in Press)]
-
Ansarian, Iman
Investigation of Effect of Mechanical Vibration During Solidification on Microstructure and Wear Properties of Zn-4Si Composite [Volume 6, Issue 1, 2022, Pages 53-65]
-
Ansarian, Iman
Investigation of Effect of Mold Mechanical Vibration During Solidification on the Structure and Corrosion Resistance of Zn-4Si Alloy [Volume 6, Issue 2, 2022, Pages 157-167]
-
Ansarian, Iman
The effect of surface severe plastic deformation on microstructure and mechanical properties of pure titanium produced by selective laser melting [(Articles in Press)]
-
Antanessian, Sibri Yana
Investigation on the Effect of Solidification Parameters on Microstructural Characteristics and Hardness of Al-Fe Alloy Produced by Directional Solidification in Bridgeman Furnace [Volume 1, Issue 1, 2017, Pages 1-8]
-
Arab, Najmeddin
Effect of Heating Temperature and Mixing Rate in Mixing Ladle on Recycling of Aluminum Slag From Melting Furnace [Volume 4, Issue 1, 2020, Pages 31-37]
-
Arab, Najmodin
Effect of Zirconium and Heat Treatment on Microstructure and Wear Properties of High Manganese Steels [Volume 5, Issue 3, 2021, Pages 185-192]
-
Arabi, Hossein
Effect of Solution Cooling Rate on Microstructure and Hardness of X-750 Superalloy [Volume 4, Issue 3, 2020, Pages 145-153]
-
Arabi, Hossien
An Investigation in the Present Phases in a Cast Co-Al-W Cobalt-Base Superalloy Using Experimental Methods and JMatPro Software [Volume 2, Issue 1, 2018, Pages 27-37]
-
Araghchi, Masoud
Simulation of Direct Chill Casting in the Presence of Low Frequency Magnetic Field to Produce 7075 Aluminum Alloy Billets [Volume 5, Issue 3, 2021, Pages 193-204]
-
Asadi, Jaber
Investigation of Mechanical Properties and in vitro Corrosion Rate of Open-Cell Cast Magnesium Foams [Volume 4, Issue 3, 2020, Pages 155-165]
-
Asghari, Fatemeh
A review on the investment casting process in the arts and jewelry industries [Volume 5, Issue 2, 2021, Pages 139-159]
-
Asgharzadeh, Peyman
Investigation on the Effect of Solidification Parameters on Microstructural Characteristics and Hardness of Al-Fe Alloy Produced by Directional Solidification in Bridgeman Furnace [Volume 1, Issue 1, 2017, Pages 1-8]
-
Ashkevary, Sahar
Investigation on Effects of Melt Temperature on Solidification Behavior of in-situ Al-Mg2Si Composite using Cooling Curve Thermal Analysis [Volume 4, Issue 1, 2020, Pages 1-9]
-
Ashuri, Gholamreza
Assessment of Bismuth and T6-Heat Treatment on The Microstructural Evaluation and Tensile Properties of SiC Nano Particle-Reinforced Al–Si Alloy (LM13) [Volume 2, Issue 2, 2018, Pages 123-134]
-
Ashuri, Gholamreza
Modification Effect of Nickel on Tensile Properties and Microstructural Characterization of Al-12%Si-1%Mg-1%Cu Alloy [Volume 3, Issue 2, 2019, Pages 113-121]
B
-
Babaei Sodani, Ramin
Effect of Directional Solidification Conditions on the Structure and Rollability of 2024 Aluminum Alloy [Volume 5, Issue 1, 2021, Pages 9-18]
-
Baghshahi, Saeed
An Investigation on the Effect of Mn on the Castability of Hypoeutectic Al-2Ni-xMn Alloys [Volume 1, Issue 2, 2017, Pages 69-78]
-
Baghshahi, Saeed
Investigation of microstructure and mechanical properties of Al-2Ni-xMn alloys as substitute for hypoeutectic Al-4Ni alloy [Volume 5, Issue 1, 2021, Pages 51-62]
-
Baharvandi, Hamid Reza
Evaluation of Foam Defects in A356 Aluminium Alloy Produced with TiH2 and CaCO3 Foaming Agents Without Stabilized Ceramic Particles [Volume 2, Issue 1, 2018, Pages 71-80]
-
Bakhtiari, Ali
Investigation of AISI 321/Al interface in compound casting at 840 °C [(Articles in Press)]
-
Bakhtiari, Reza
Optimization of Magnesium Solubility Factor in Production of Ductile Iron using Gating System Addition Method [Volume 3, Issue 1, 2019, Pages 37-43]
-
Baniasadi, Yeganeh
Synthesis and characterization of lightweight Al35Mg35Mn2Sn8Zn20 entropic alloy [(Articles in Press)]
-
Baradaran Mehrabadi, H.
Effect of Immersion Time and Temperature on the Interface Characteristics of Pure Aluminium and Plain Carbon Steel [Volume 2, Issue 1, 2018, Pages 55-69]
-
Bayat, Omid
Determination of Critical Pressure and Impeding Pressure for Manganese Evaporation During the Induction Melting Process of Manganese-Nickel Alloys [Volume 3, Issue 2, 2019, Pages 67-74]
-
Bayat, Omid
Effect of Directional Solidification Conditions on the Structure and Rollability of 2024 Aluminum Alloy [Volume 5, Issue 1, 2021, Pages 9-18]
-
Behrangi, Sahand
An Investigation on Reduction of Insoluble Build-ups in the Inductor of Ductile Iron Pouring Machine [Volume 2, Issue 2, 2018, Pages 101-108]
-
Beigie Kheradmand, Azam
Effect of Minor Amount of Scandium on the Microstructure of 7000 Series Aluminium in as Cast, Homogenized and Artificial Age Hardened Conditions [Volume 2, Issue 4, 2019, Pages 211-226]
-
Boutorabi, Seyed Mohammad Ali
Effect of Austempering Time and Temperature on the Microstructure and Hardness of Bainitic Silicon Steel [Volume 1, Issue 2, 2017, Pages 79-87]
-
Boutorabi, Seyed Mohammad Ali
From the Editor [Volume 1, Issue 2, 2017, Pages 1-1]
-
Boutorabi, Seyed Mohammad Ali
Nano Double Oxide Film (NDOF) Characteristics of A356 Alloy Casting Protected With Beryllium in Turbulence Conditions [Volume 2, Issue 2, 2018, Pages 71-78]
-
Boutorabi, Seyed Mohammad Ali
Investigation of Microstructure and Hardness of upper Bainitic Austempered Aluminum Ductile Iron (Fe-3.4C-4.3Al-Mg) [Volume 3, Issue 2, 2019, Pages 75-90]
-
Boutorabi, Seyed Mohammad Ali
Effect of Solution Cooling Rate on Microstructure and Hardness of X-750 Superalloy [Volume 4, Issue 3, 2020, Pages 145-153]
-
Boutorabi, Seyed Mohammad Ali
Effect of Sb addition and casting modulus on graphite morphology, microstructure and mechanical properties of ductile cast iron [Volume 5, Issue 2, 2021, Pages 67-77]
-
Boutorabi, Seyed Mohammad Ali
The Effect of CeO2 and Hf Additives as a Grain Refinement on the Microstructure and Hardness of Austenitic Manganese Steel [Volume 5, Issue 3, 2021, Pages 165-174]
D
-
Damadi, Seyyed Reza
Semi-Solid Rheocasting of Al-5Cu-1Ag High Strength Alloy [Volume 1, Issue 3, 2018, Pages 193-200]
-
Damadi, Seyyed Reza
Investigation of Microstructure and Chemical Composition of Mg-Ag-Ce-Zr Cast Alloy (QE22) [Volume 3, Issue 4, 2020, Pages 237-245]
-
Damavandi, Esmaeil
The Effect of Pouring Temperature, Mechanical Vibration and Partial Remelting on Microstructure and Mechanical Properties of Al-A390 Alloy [Volume 2, Issue 1, 2018, Pages 39-53]
-
Daneshifar, MohammadHassan
Effect of Stirring Temperature on the Morphology of Primary Si Particles, Hardness and Wear Behavior of Al-20wt.%Si Alloy Prepared by Semi-Solid Stir Casting [Volume 3, Issue 3, 2019, Pages 151-162]
-
Daneshifar, MohammadHassan
Synthesis and characterization of lightweight Al35Mg35Mn2Sn8Zn20 entropic alloy [(Articles in Press)]
-
Dastbaz, Ehsan
Numerical simulation of solidification microstructure in selective laser melting additive manufacturing and studying the effect of process parameters on grains morphologies [Volume 3, Issue 4, 2020, Pages 229-236]
-
Davari, Mohadeseh
Thermodynamic Modeling of the Melting Behavior of Metallic Nanoparticles Embedded in a Matrix [Volume 4, Issue 4, 2021, Pages 227-236]
-
Davodi, Ali
Investigation of Heat Treatment Methods on Microstructure and Hardness of Aluminum-Nickel Bronze Alloy (C95500) [Volume 3, Issue 4, 2020, Pages 247-257]
-
Dehhaghi, Ali
Investigation on the effect of running system design on the melt flow and feeding of a hollow cylinder of A356 Al alloy by simulation [Volume 1, Issue 3, 2018, Pages 133-148]
-
Dehhaghi, Ali
Nano Double Oxide Film (NDOF) Characteristics of A356 Alloy Casting Protected With Beryllium in Turbulence Conditions [Volume 2, Issue 2, 2018, Pages 71-78]
-
Delshekasteh, Nima
Statistical Approach on Microstructure and Hardness of Semi-Solid Cast Aluminum Alloy A380 Produced by Mechanical Vibration in
Argon Gas Atmosphere [Volume 2, Issue 4, 2019, Pages 275-286]
-
Divandari, Mehdi
The Effect of Pouring Temperature on Graphitization of Cast Bars Produced by in-Mold Lost Foam Process [Volume 1, Issue 1, 2017, Pages 23-35]
-
Divandari, Mehdi
Investigation on the effect of running system design on the melt flow and feeding of a hollow cylinder of A356 Al alloy by simulation [Volume 1, Issue 3, 2018, Pages 133-148]
-
Divandari, Mehdi
Effect of Immersion Time and Temperature on the Interface Characteristics of Pure Aluminium and Plain Carbon Steel [Volume 2, Issue 1, 2018, Pages 55-69]
-
Divandari, Mehdi
Effects of Aluminum Content on Microstructure and Matrix Hardness of Spherical Graphite Cast Irons Produced by in-Mold Process [Volume 2, Issue 4, 2019, Pages 251-261]
-
Divandari, Mehdi
Optimization of Magnesium Solubility Factor in Production of Ductile Iron using Gating System Addition Method [Volume 3, Issue 1, 2019, Pages 37-43]
-
Divandari, Mehdi
Investigation of Oxide Film Characteristics in Al-Zn Melt by Oxide-Metal-Oxide Technique [Volume 3, Issue 3, 2019, Pages 131-140]
E
-
Ebrahimi, Golamreza
An Investigation in the Present Phases in a Cast Co-Al-W Cobalt-Base Superalloy Using Experimental Methods and JMatPro Software [Volume 2, Issue 1, 2018, Pages 27-37]
-
Ehsani, Naser
Evaluation of Foam Defects in A356 Aluminium Alloy Produced with TiH2 and CaCO3 Foaming Agents Without Stabilized Ceramic Particles [Volume 2, Issue 1, 2018, Pages 71-80]
-
Eisaabadi, Ghasem
Effect of Calcium on Oxidation Resistance and Fluidity of Magnesium Alloy AZ91 [Volume 2, Issue 3, 2018, Pages 193-200]
-
Eisaabadi, Ghasem
Assessment and Control of the Damages to Cast Al Alloys During Melt Preparation and Casting [Volume 5, Issue 2, 2021, Pages 119-138]
-
Etminan, Mostafa
Evolution of Aging Treatment Effect on the Microstructure and Hardness of a Co-Al-W-Ti-Ta Based Superalloy [Volume 4, Issue 2, 2020, Pages 89-98]
-
Etminan, Mostafa
Effect of Aging on the High Temperature Mechanical Properties of a Novel Co-7Al-7W-4Ti-2Ta Superalloy [Volume 4, Issue 4, 2021, Pages 193-201]
-
Ezatpour, Hamidreza
Mechanical Properties, Corrosion and Microstructure of Mg/2FA/0.3GNPs (wt.%) Hybrid Nanobiocomposite Produced by Mechanical Stir Casting and Remelting under Argon Pressure [Volume 3, Issue 4, 2020, Pages 201-216]
-
Ezlegeni, Mahdi
Numerical Simulation of Fluid Flow and Lubricant Powder Behavior in Steel Continuous Casting Mold for Improving of Produced Ingot Properties [Volume 2, Issue 3, 2018, Pages 181-192]
F
-
Fallah, Parastoo
The Effect of Precipitation Hardening on Microstructural Characteristics of Directionally Solidified Nickel-Based Superalloy GTD-111 [Volume 1, Issue 2, 2017, Pages 109-120]
-
Fallah, Parastoo
The Effect of Withdrawal Rate on the Microstructure of Ni-based Superalloy GTD-111 through the Directional Solidification [Volume 4, Issue 4, 2021, Pages 237-246]
-
Farahany, Saeed
Using Thermal Analysis and Interrupted Quenching Technique to Examine Interactive Effect of Bi-Sr on Porosity Formation Characteristics in Al-7Si-0.4Mg Alloy [Volume 1, Issue 3, 2018, Pages 181-191]
-
Farahany, Saeed
Synergy Effect of Bi Addition, Cooling Condition and Artificial Aging on Performance of Al-8Si-0.3Mg Cast Alloy [Volume 2, Issue 3, 2018, Pages 147-160]
-
Farahany, Saeed
Simultaneous Effect of Melt Superheating and Holding Time on Structural Changes, Solidification Characteristics, and Hardness of Al-20Mg2Si-2Cu Composite [Volume 5, Issue 2, 2021, Pages 93-106]
-
Farahany, Saeed
The Role of Barium in Structural Changes, Mechanical Properties, and Wear Behavior of Al-20Mg2Si Composite [Volume 6, Issue 1, 2022, Pages 9-21]
-
Farajollahi, Ramezanali
Invistigation of the effect of heating rate in non-isothermal aging heat treatment on the microstructure and mechanical properties of in-situ aluminum-nickel aluminide composite [(Articles in Press)]
-
Farzammehr, Navid
An Investigation on Reduction of Insoluble Build-ups in the Inductor of Ductile Iron Pouring Machine [Volume 2, Issue 2, 2018, Pages 101-108]
-
Fazeli, Hamid
Prediction of Shrinkage Porosity and its Remedy by Numerical Simulation in
a Conical Carbon Steel Casting [Volume 4, Issue 1, 2020, Pages 39-50]
-
Foroughifar, Aliasghar
Numerical Simulation of Fluid Flow and Lubricant Powder Behavior in Steel Continuous Casting Mold for Improving of Produced Ingot Properties [Volume 2, Issue 3, 2018, Pages 181-192]
G
-
Ghandvar, Hamidreza
Simultaneous Effect of Melt Superheating and Holding Time on Structural Changes, Solidification Characteristics, and Hardness of Al-20Mg2Si-2Cu Composite [Volume 5, Issue 2, 2021, Pages 93-106]
-
Ghandvar, Hamidreza
The Role of Barium in Structural Changes, Mechanical Properties, and Wear Behavior of Al-20Mg2Si Composite [Volume 6, Issue 1, 2022, Pages 9-21]
-
Ghaniabadi, Ehasn
Effect of Semi-Solid Rotating Container Process on Characteristics of Solidification, Dendrite Coherency and Microstructure of AZ91 Magnesium Alloy [Volume 2, Issue 3, 2018, Pages 135-146]
-
Ghayour, Hamid
Effect of Tungsten on the Hardness and Impact Resistance of Ni-Hard 4 Cast Iron [Volume 3, Issue 2, 2019, Pages 91-99]
-
Ghazi mir Saeed, seyed Mahdi
Evolution of Aging Treatment Effect on the Microstructure and Hardness of a Co-Al-W-Ti-Ta Based Superalloy [Volume 4, Issue 2, 2020, Pages 89-98]
-
Ghazi mir Saeed, seyed Mahdi
Effect of withdrawal rate of directional solidification on the microstructure of a new Cobalt-Nickel based Superalloy [(Articles in Press)]
-
Ghazi mir Saeed, Seyed Mahdi
Effect of Crucible Type on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 6, Issue 1, 2022, Pages 3-8]
-
Ghazi Mir Saeed, Seyed Mahdi
Effect of Melt Holding Time on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 3, Issue 1, 2019, Pages 29-36]
-
Ghazi Mir Saeed, Seyed Mahdi
Effect of Aging on the High Temperature Mechanical Properties of a Novel Co-7Al-7W-4Ti-2Ta Superalloy [Volume 4, Issue 4, 2021, Pages 193-201]
-
Ghazi Mir Saeed, Seyed Mahdi
The Effect of Melt Holding Time and Vacuum Pressure on the High Temperature Fatigue Life of Ni Based Hastelloy X Superalloy [Volume 5, Issue 3, 2021, Pages 205-213]
-
Gholami, Hedayat
Effect of Temperature Variations, Thermal Stresses and Region of Meniscus of Copper Mold on Quality of Billet Produced by Continuous Casting Process of Steel [Volume 2, Issue 4, 2019, Pages 227-237]
H
-
Hadi, Morteza
Determination of Critical Pressure and Impeding Pressure for Manganese Evaporation During the Induction Melting Process of Manganese-Nickel Alloys [Volume 3, Issue 2, 2019, Pages 67-74]
-
Hadi, Morteza
Effect of Directional Solidification Conditions on the Structure and Rollability of 2024 Aluminum Alloy [Volume 5, Issue 1, 2021, Pages 9-18]
-
Hamidi, Elnaz
Evaluation of the Microstructure and Wear Properties of A356/Al2O3 Nanocomposite Produced by Stir Casting Method [Volume 1, Issue 1, 2017, Pages 59-68]
-
Hanachi, Mehrdad
The Effects of Cooling Rate after Solutionizing on the Microstructural Evaluation of Cast IN718 Superalloy during Long-Term Thermal Exposure [Volume 4, Issue 3, 2020, Pages 175-184]
-
Hasasi, Seyed Abbas
Solidification Microstructure of A390 Aluminum Alloy Manufactured by Squeeze Casting Process [Volume 2, Issue 1, 2018, Pages 1-10]
-
Hassanpour, Hossein
Effect of Hot Pressing on the Microstructure and Hardness of A390 Cast Aluminum Alloy [Volume 6, Issue 2, 2022, Pages 133-141]
-
Hassasi, Seyed Abbas
Effect of Squeeze Casting Parameters on Mechanical Properties and Wear Behavior of A356 Aluminium Alloy [Volume 2, Issue 4, 2019, Pages 263-273]
-
Heidari Ghaleh, Milad
Evaluation of Foam Defects in A356 Aluminium Alloy Produced with TiH2 and CaCO3 Foaming Agents Without Stabilized Ceramic Particles [Volume 2, Issue 1, 2018, Pages 71-80]
-
Hejazi, Jalal
Introduction [Volume 1, Issue 1, 2017, Pages 1-1]
-
Hesami, Leila
Investigation of the Effect of Copper on Microstructural Modification and Quality Index of Al-15Mg2Si Composite [Volume 3, Issue 4, 2020, Pages 217-227]
-
Heydari, Asghar
Prediction of Shrinkage Porosity and its Remedy by Numerical Simulation in
a Conical Carbon Steel Casting [Volume 4, Issue 1, 2020, Pages 39-50]
-
Homayounjam, Nazanin
A review on the investment casting process in the arts and jewelry industries [Volume 5, Issue 2, 2021, Pages 139-159]
-
Hoseini, Seyed Alireza
Investigation of Mechanical Properties and in vitro Corrosion Rate of Open-Cell Cast Magnesium Foams [Volume 4, Issue 3, 2020, Pages 155-165]
-
Hosseini, Shabnam
Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
-
Hosseini-Jebeli, Hasan
The influence of solid fraction on the microstructural evolution and mechanical properties of in situ Mg/Mg2Si composite produced by semi-solid casting process [(Articles in Press)]
-
Hosseinipour, Seyed Jamal
Effect of Pouring Temperature and Partial Remelting on Microstructure and Wear Properties of A390 Alloy in Slope Cooling Casting [Volume 1, Issue 1, 2017, Pages 37-46]
-
Hosseinipour, Seyed Jamal
Solidification Microstructure of A390 Aluminum Alloy Manufactured by Squeeze Casting Process [Volume 2, Issue 1, 2018, Pages 1-10]
-
Hosseinipour, Seyed Jamal
Effect of Squeeze Casting Parameters on Mechanical Properties and Wear Behavior of A356 Aluminium Alloy [Volume 2, Issue 4, 2019, Pages 263-273]
-
Hosseinipour, Seyed Jamal
Investigation of Squeeze Casting Process Parameters for Metal Matrix Composite Fabrication from ZAMAK5 Alloy Reinforced with Alumina preform [(Articles in Press)]
-
Hosseinzadeh, Mohammad
Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
I
-
Isfahani, Taghi
Effect of Tungsten on the Hardness and Impact Resistance of Ni-Hard 4 Cast Iron [Volume 3, Issue 2, 2019, Pages 91-99]
-
Isfahani, Taghi
Effect of Directional Solidification Conditions on the Structure and Rollability of 2024 Aluminum Alloy [Volume 5, Issue 1, 2021, Pages 9-18]
J
-
Jabbareh, Mohammad Amin
Thermodynamic Modeling of the Melting Behavior of Metallic Nanoparticles Embedded in a Matrix [Volume 4, Issue 4, 2021, Pages 227-236]
-
Jabbareh, Mohammad Amin
Calculation of phase diagrams using "Jarvis" algorithm [Volume 5, Issue 1, 2021, Pages 41-50]
-
Jabbareh, Mohammad Amin
Synthesis and characterization of lightweight Al35Mg35Mn2Sn8Zn20 entropic alloy [(Articles in Press)]
-
Jadidi, Ali
Effect of Solutionizing Heat Treatment Duration on the Microstructural Defects of CMSX-4 Single Crystal [Volume 6, Issue 2, 2022, Pages 143-155]
-
Jafari, Negar
Investigating of Wettability Modification Methods on Microstructure and Mechanical Properties of Silicon Carbide/ Aluminum Composite Produced by Stir Casting [Volume 3, Issue 1, 2019, Pages 21-28]
-
Jafari-Ramiani, Amin
Non-linear Standard Model for Optimization of Charge Materials in Crucible and Induction Melting Furnaces [Volume 5, Issue 2, 2021, Pages 107-118]
-
Jafarzadegan, Mostafa
Effect of Si on Castability of Al-Cu-Si Alloys [Volume 4, Issue 4, 2021, Pages 215-226]
-
Jamaati, Roohollah
Effect of Hot Pressing on the Microstructure and Hardness of A390 Cast Aluminum Alloy [Volume 6, Issue 2, 2022, Pages 133-141]
-
Jamaati, Roohollah
Invistigation of the effect of heating rate in non-isothermal aging heat treatment on the microstructure and mechanical properties of in-situ aluminum-nickel aluminide composite [(Articles in Press)]
-
Jamshidi Aval, Hamed
Invistigation of the effect of heating rate in non-isothermal aging heat treatment on the microstructure and mechanical properties of in-situ aluminum-nickel aluminide composite [(Articles in Press)]
-
Javahery, Mojtaba
Microstructure and Hardness Evaluation of Heat Treated Cast Steel by Eddy Current Nondestructive Method [Volume 1, Issue 3, 2018, Pages 149-160]
-
Javahery, Mojtaba
Effect of Manganese Content on the as Cast Microstructure of Nodular Cast Iron [Volume 4, Issue 4, 2021, Pages 203-213]
K
-
Kachuee, Nima
The Effect of Melt Holding Time and Vacuum Pressure on the High Temperature Fatigue Life of Ni Based Hastelloy X Superalloy [Volume 5, Issue 3, 2021, Pages 205-213]
-
Kalvand, Hamed
Properties of SAE660 Bronze Bearing at Four Different Casting Conditions [Volume 2, Issue 2, 2018, Pages 89-100]
-
Karbasian, Gholamreza
Prediction of Shrinkage Porosity and its Remedy by Numerical Simulation in
a Conical Carbon Steel Casting [Volume 4, Issue 1, 2020, Pages 39-50]
-
Karimi, Hadi
Determination of Critical Pressure and Impeding Pressure for Manganese Evaporation During the Induction Melting Process of Manganese-Nickel Alloys [Volume 3, Issue 2, 2019, Pages 67-74]
-
Karimian, Majid
Experimental Investigation of Effective Parameters on Gas Exhaust from the Mold in Lost Foam Casting Method [Volume 1, Issue 3, 2018, Pages 161-170]
-
Karimifar, Sina
Properties of SAE660 Bronze Bearing at Four Different Casting Conditions [Volume 2, Issue 2, 2018, Pages 89-100]
-
Karimi Taghanaki, Ali
Effect of Tungsten on the Hardness and Impact Resistance of Ni-Hard 4 Cast Iron [Volume 3, Issue 2, 2019, Pages 91-99]
-
Kebriyaei, Amir
The Effect of Precipitation Hardening on Microstructural Characteristics of Directionally Solidified Nickel-Based Superalloy GTD-111 [Volume 1, Issue 2, 2017, Pages 109-120]
-
Kebriyaei, Amir
The Effect of Withdrawal Rate on the Microstructure of Ni-based Superalloy GTD-111 through the Directional Solidification [Volume 4, Issue 4, 2021, Pages 237-246]
-
Kermanpur, Ahmad
Effect of directional solidification on the microstructure and mechanical properties of a 2th Generation Ni-base single crystal superalloy CMSX-4 [Volume 3, Issue 4, 2020, Pages 187-199]
-
Khalvan, Mohammad Mehdi
Effects of Aluminum Content on Microstructure and Matrix Hardness of Spherical Graphite Cast Irons Produced by in-Mold Process [Volume 2, Issue 4, 2019, Pages 251-261]
-
Khani, Masood
Mechanical Properties, Corrosion and Microstructure of Mg/2FA/0.3GNPs (wt.%) Hybrid Nanobiocomposite Produced by Mechanical Stir Casting and Remelting under Argon Pressure [Volume 3, Issue 4, 2020, Pages 201-216]
-
Kheirabi, Ali
Effect of the Ablation Casting Binder Type on Improving the Tensile Strength of A356 Aluminum Alloy [Volume 5, Issue 3, 2021, Pages 175-183]
-
Kheirandish, Shahram
Effect of Austempering Time and Temperature on the Microstructure and Hardness of Bainitic Silicon Steel [Volume 1, Issue 2, 2017, Pages 79-87]
-
Kheirandish, Shahram
An Investigation in the Present Phases in a Cast Co-Al-W Cobalt-Base Superalloy Using Experimental Methods and JMatPro Software [Volume 2, Issue 1, 2018, Pages 27-37]
-
Khiabani, Arash
Effect of Remelting and Standard Heat Treatment on Microstructure and Mechanical Properties of IN738LC Superalloy [Volume 4, Issue 2, 2020, Pages 99-109]
-
Khiabani, Arash
The Effects of Cooling Rate after Solutionizing on the Microstructural Evaluation of Cast IN718 Superalloy during Long-Term Thermal Exposure [Volume 4, Issue 3, 2020, Pages 175-184]
-
Khodabandeh, Alireza
Effect of Sample Diameter and Withdrawal Rate on Microstructure and Hot Tensile Behavior of Directionally Solidified PWA 1483 Superalloy [Volume 3, Issue 3, 2019, Pages 175-185]
-
Kiani-Rashid, Ali-Reza
Design of Refractory High-Entropy Alloys to Reduce Weight and Cost [Volume 4, Issue 3, 2020, Pages 167-173]
-
Kianvash, Abbas
Effects of Chemical Composition and Heat Treatment Conditions on the Magnetic Properties and Microstructure of Cast Fe–Cr–Co Magnets [Volume 4, Issue 1, 2020, Pages 11-20]
-
Kianvash, Abbas
Comparison of Ti and Nb Microalloy Addition on the Microstructure and Mechanical Properties of a Quenched-Partitioned Cast Steel [Volume 5, Issue 1, 2021, Pages 31-40]
-
Kolahdooz, Amin
Parametric Investigation of Cooling Slope Casting Method on the Microstructure and Hardness Values of Al-A380 Alloy [Volume 2, Issue 2, 2018, Pages 109-121]
-
Kolahdooz, Amin
Statistical Approach on Microstructure and Hardness of Semi-Solid Cast Aluminum Alloy A380 Produced by Mechanical Vibration in
Argon Gas Atmosphere [Volume 2, Issue 4, 2019, Pages 275-286]
-
Korojy, Bahman
Effect of As Cast Microstructure on Recrystallization and Recovery Processes of 2304 Duplex Stainless Steel [Volume 2, Issue 3, 2018, Pages 201-209]
-
Korojy, Bahman
Effect of Stirring Temperature on the Morphology of Primary Si Particles, Hardness and Wear Behavior of Al-20wt.%Si Alloy Prepared by Semi-Solid Stir Casting [Volume 3, Issue 3, 2019, Pages 151-162]
-
Korojy, Bahman
Investigation of Mechanical Properties and in vitro Corrosion Rate of Open-Cell Cast Magnesium Foams [Volume 4, Issue 3, 2020, Pages 155-165]
-
Kouhi, Saeed
Effect of Crucible Type on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 6, Issue 1, 2022, Pages 3-8]
-
Kouhi Faeigh Dehkordi, Saeed
Effect of Melt Holding Time on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 3, Issue 1, 2019, Pages 29-36]
L
-
Limooei, Mohammad Bagher
Formation of Zinc-Aluminum Flake Coating on Cast Iron Disc and Consideration of Corrosion Behavior [Volume 4, Issue 1, 2020, Pages 21-29]
-
Limooei, Mohammad Bagher
Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
-
Limooei, Mohammad Bagher
Effect of Stabilized Zirconia Oxide by Y2O3 and Silicon Carbide on Physical Stability of Magnesite Based Refractories [Volume 6, Issue 1, 2022, Pages 45-51]
M
-
Mahdifar, Mohsen
The Effect of Pouring Temperature on Graphitization of Cast Bars Produced by in-Mold Lost Foam Process [Volume 1, Issue 1, 2017, Pages 23-35]
-
Malekan, Mahdi
An investigation on the effect of grain refinement on the fluidity and hot tearing susceptibility of Ce-modified 2024 Al alloy [(Articles in Press)]
-
Malekan, Mehdi
A review on the investment casting process in the arts and jewelry industries [Volume 5, Issue 2, 2021, Pages 139-159]
-
Malekoutikhah, Mohammad
Effect of Melt Shearing Time by Vertical Spiral Stirrer on Hot Tearing Behavior of A206 Alloy [Volume 6, Issue 1, 2022, Pages 23-34]
-
Manafi, Sahebali
Effect of Stabilized Zirconia Oxide by Y2O3 and Silicon Carbide on Physical Stability of Magnesite Based Refractories [Volume 6, Issue 1, 2022, Pages 45-51]
-
Mansouri, Yavar
The evaluation of thermomechanical and heat treatment parameters on the microstructure and tensile properties of Ti-6Al-2Sn-4Zr-2Mo-0.08Si alloy [(Articles in Press)]
-
Mehditabar, Aref
Evaluation of Microstructure, Physical and Mechanical Properties of Functionally Graded Al-Cu Fabricated by Horizontal Centrifugal Casting [Volume 1, Issue 1, 2017, Pages 47-58]
-
Mehmannavaz, Hossein
Prediction of Shrinkage Porosity and its Remedy by Numerical Simulation in
a Conical Carbon Steel Casting [Volume 4, Issue 1, 2020, Pages 39-50]
-
Meysami, Amirhossein
Numerical Simulation of Fluid Flow and Lubricant Powder Behavior in Steel Continuous Casting Mold for Improving of Produced Ingot Properties [Volume 2, Issue 3, 2018, Pages 181-192]
-
Mirbagheri, Seyed Mohammad Hossein
Investigation of Heat Transfer Coefficients Effects in Directional Solidification of GTD111 Super-alloy [Volume 3, Issue 1, 2019, Pages 11-20]
-
Mirbagheri, Seyed Mohammad Hossein
To Produce an Advanced Zamak5 Composite with a 3D-Open Cell Copper Foam by Casting Method [Volume 4, Issue 3, 2020, Pages 129-136]
-
Mirbagheri, Seyed Mohammad Hossein
Investigation of the effect of misorientation grain growth on the creep behavior of nickel-based GTD111DS superalloy [Volume 5, Issue 2, 2021, Pages 79-92]
-
Mirbagheri, Seyed Mohammad Hossein
Microstructure Characterization and Creep Behavior on the Casting CMM88Y Super Alloy turbine Blade [Volume 6, Issue 2, 2022, Pages 113-124]
-
Mirdamadi, Shamsedin
Effect of Minor Amount of Scandium on the Microstructure of 7000 Series Aluminium in as Cast, Homogenized and Artificial Age Hardened Conditions [Volume 2, Issue 4, 2019, Pages 211-226]
-
Mirzadeh, Hamed
Calculating the Elemental Diffusivities During Homogenization of as-cast Inconel 718 Superalloy [Volume 3, Issue 3, 2019, Pages 123-129]
-
Moazami-Goudarzi, Mohammad
Effect of Sample Diameter and Withdrawal Rate on Microstructure and Hot Tensile Behavior of Directionally Solidified PWA 1483 Superalloy [Volume 3, Issue 3, 2019, Pages 175-185]
-
Moghimi Dehkordi, Mehdi
Experimental Investigation of Effective Parameters on Gas Exhaust from the Mold in Lost Foam Casting Method [Volume 1, Issue 3, 2018, Pages 161-170]
-
Mohajeri, Mahdiye
Non-linear Standard Model for Optimization of Charge Materials in Crucible and Induction Melting Furnaces [Volume 5, Issue 2, 2021, Pages 107-118]
-
Mohamammadyari, Saeid
Production and Characterization of SAC-xAl Lead Free Nanocomposite Solder via Melt-Spinning Technique [Volume 1, Issue 3, 2018, Pages 171-180]
-
Mohammadaliha, Mehdi
The Effect of CeO2 and Hf Additives as a Grain Refinement on the Microstructure and Hardness of Austenitic Manganese Steel [Volume 5, Issue 3, 2021, Pages 165-174]
-
Mohammadi, Hossein
An investigation on the effect of grain refinement on the fluidity and hot tearing susceptibility of Ce-modified 2024 Al alloy [(Articles in Press)]
-
Mohammadi, Morteza
Effect of Modifier Elements on Quality Index Improvement of A356 Aluminum Alloy Before and After T6 Heat Treatment [Volume 2, Issue 1, 2018, Pages 11-25]
-
Mohseni Zonoozi, Elnaz
Effects of Chemical Composition and Heat Treatment Conditions on the Magnetic Properties and Microstructure of Cast Fe–Cr–Co Magnets [Volume 4, Issue 1, 2020, Pages 11-20]
-
Momeni, Amir
Evaluation of the Effect of Heat Treatment on Structural Changes and Mechanical Properties of Ti-48Al-2Cr-2Nb Intermetallic [Volume 6, Issue 2, 2022, Pages 125-132]
-
Morakabati, Maryam
Evolution of Aging Treatment Effect on the Microstructure and Hardness of a Co-Al-W-Ti-Ta Based Superalloy [Volume 4, Issue 2, 2020, Pages 89-98]
-
Morakabati, Maryam
Effect of Aging on the High Temperature Mechanical Properties of a Novel Co-7Al-7W-4Ti-2Ta Superalloy [Volume 4, Issue 4, 2021, Pages 193-201]
-
Morakabati, Maryam
Evaluation of the Effect of Carbon and Solution Treatment on the Microstructure and Mechanical Properties of ASTM F75 Cast Co Based Alloy [Volume 6, Issue 1, 2022, Pages 35-44]
-
Morakabati, Maryam
Evaluation of the Effect of Heat Treatment on Structural Changes and Mechanical Properties of Ti-48Al-2Cr-2Nb Intermetallic [Volume 6, Issue 2, 2022, Pages 125-132]
-
Morakabati, Maryam
The evaluation of thermomechanical and heat treatment parameters on the microstructure and tensile properties of Ti-6Al-2Sn-4Zr-2Mo-0.08Si alloy [(Articles in Press)]
-
Mostafavi, Mohammad
Effect of Si on Castability of Al-Cu-Si Alloys [Volume 4, Issue 4, 2021, Pages 215-226]
N
-
Najarian, Ali
Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
-
Najmi, Mohammad
Microstructure Characterization and Creep Behavior on the Casting CMM88Y Super Alloy turbine Blade [Volume 6, Issue 2, 2022, Pages 113-124]
-
Nakhodachi, Soheil
Investigation of the effect of misorientation grain growth on the creep behavior of nickel-based GTD111DS superalloy [Volume 5, Issue 2, 2021, Pages 79-92]
-
Naseri Azari, Golnaz
An Investigation on Reduction of Insoluble Build-ups in the Inductor of Ductile Iron Pouring Machine [Volume 2, Issue 2, 2018, Pages 101-108]
-
Naseri Azari, Golnaz
Investigation of Microstructure and Chemical Composition of Mg-Ag-Ce-Zr Cast Alloy (QE22) [Volume 3, Issue 4, 2020, Pages 237-245]
-
Naser-Zoshki, Hamed
Design of Refractory High-Entropy Alloys to Reduce Weight and Cost [Volume 4, Issue 3, 2020, Pages 167-173]
-
Nasresfahani, Mohamad Reza
Effect of Melt Shearing Time by Vertical Spiral Stirrer on Hot Tearing Behavior of A206 Alloy [Volume 6, Issue 1, 2022, Pages 23-34]
-
Nasri, Mehdi
Effect of Remelting and Standard Heat Treatment on Microstructure and Mechanical Properties of IN738LC Superalloy [Volume 4, Issue 2, 2020, Pages 99-109]
-
Nategh, Saeid
Effect of Minor Amount of Scandium on the Microstructure of 7000 Series Aluminium in as Cast, Homogenized and Artificial Age Hardened Conditions [Volume 2, Issue 4, 2019, Pages 211-226]
-
Navaei, Soheil
Comparison of Wear Behavior of Ductile Iron in Austempered and Quenched-Tempered Conditions [Volume 3, Issue 3, 2019, Pages 141-150]
-
Nazari, Maryam
Effect of Modifier Elements on Quality Index Improvement of A356 Aluminum Alloy Before and After T6 Heat Treatment [Volume 2, Issue 1, 2018, Pages 11-25]
-
Nikukar, Hamed
Optimization of Magnesium Solubility Factor in Production of Ductile Iron using Gating System Addition Method [Volume 3, Issue 1, 2019, Pages 37-43]
-
Nordin, Nur Azma
Simultaneous Effect of Melt Superheating and Holding Time on Structural Changes, Solidification Characteristics, and Hardness of Al-20Mg2Si-2Cu Composite [Volume 5, Issue 2, 2021, Pages 93-106]
-
Nordin, Nur Azma
The Role of Barium in Structural Changes, Mechanical Properties, and Wear Behavior of Al-20Mg2Si Composite [Volume 6, Issue 1, 2022, Pages 9-21]
-
Nourbaksh, Sayyed Hasan
The influence of solid fraction on the microstructural evolution and mechanical properties of in situ Mg/Mg2Si composite produced by semi-solid casting process [(Articles in Press)]
-
Nourouzi, Salman
Effect of Pouring Temperature and Partial Remelting on Microstructure and Wear Properties of A390 Alloy in Slope Cooling Casting [Volume 1, Issue 1, 2017, Pages 37-46]
-
Nourouzi, Salman
The Effect of Pouring Temperature, Mechanical Vibration and Partial Remelting on Microstructure and Mechanical Properties of Al-A390 Alloy [Volume 2, Issue 1, 2018, Pages 39-53]
O
-
Omrani, Hamid
Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
-
Omranian Mohammadi, Peiman
Formation of Zinc-Aluminum Flake Coating on Cast Iron Disc and Consideration of Corrosion Behavior [Volume 4, Issue 1, 2020, Pages 21-29]
-
Omranian Mohammadi, Peiman
Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
P
-
Paridari, Shima
Effect of Calcium on Oxidation Resistance and Fluidity of Magnesium Alloy AZ91 [Volume 2, Issue 3, 2018, Pages 193-200]
-
Peyravi, Aَli
Effect of Directional Solidification Conditions on the Structure and Rollability of 2024 Aluminum Alloy [Volume 5, Issue 1, 2021, Pages 9-18]
-
Pirnajmedin, Najme
Effect of Sb addition and casting modulus on graphite morphology, microstructure and mechanical properties of ductile cast iron [Volume 5, Issue 2, 2021, Pages 67-77]
-
Pourgharibshahi, Mohammad
Effect of the Ablation Casting Binder Type on Improving the Tensile Strength of A356 Aluminum Alloy [Volume 5, Issue 3, 2021, Pages 175-183]
-
Pourghorban, Amin
The Effect of Inert Gas Injection Semisolid Process on the Structure and Hot Tearing Susceptibility of Al-4.3%Cu Alloy [Volume 3, Issue 1, 2019, Pages 1-10]
R
-
Rabiee, Sayed Mahmood
The Effect of Pouring Temperature, Mechanical Vibration and Partial Remelting on Microstructure and Mechanical Properties of Al-A390 Alloy [Volume 2, Issue 1, 2018, Pages 39-53]
-
Raei Dehaghi, Mohammad
Effect of Melt Shearing Time by Vertical Spiral Stirrer on Hot Tearing Behavior of A206 Alloy [Volume 6, Issue 1, 2022, Pages 23-34]
-
Raeissi, Mehdi
The influence of solid fraction on the microstructural evolution and mechanical properties of in situ Mg/Mg2Si composite produced by semi-solid casting process [(Articles in Press)]
-
Rahimi, Abolfazl
Developing Ag-9Pd (Silvadium) Casting Alloys with High-Luminosity Lifespan for Traditional Jewelry [Volume 4, Issue 2, 2020, Pages 111-118]
-
Rahimi, Gholam Hossien
Evaluation of Microstructure, Physical and Mechanical Properties of Functionally Graded Al-Cu Fabricated by Horizontal Centrifugal Casting [Volume 1, Issue 1, 2017, Pages 47-58]
-
Rahimpour Besra, Rahim
Effect of Inoculation and Casting Modulus on the as Cast Microstructure of Austenitic Manganese Iron with Nodular Graphite [Volume 5, Issue 1, 2021, Pages 19-30]
-
Raki, Nader
Parametric Investigation of Cooling Slope Casting Method on the Microstructure and Hardness Values of Al-A380 Alloy [Volume 2, Issue 2, 2018, Pages 109-121]
-
Ramezani, Nabiollah
Energy Management in Steelmaking by Electric Arc Furnace Based on OLTC [Volume 4, Issue 1, 2020, Pages 51-67]
-
Ranjbarpour, Hadiseh
Effect of Pouring Temperature and Partial Remelting on Microstructure and Wear Properties of A390 Alloy in Slope Cooling Casting [Volume 1, Issue 1, 2017, Pages 37-46]
-
Razaghian Arani, Ahmad
Effect of Severe Plastic Deformation on Mechanical Properties and Microstructure of A520 Al-Alloy Produced by Semisolid and Ordinary Casting [Volume 1, Issue 1, 2017, Pages 9-21]
-
Razavi, Seyed Hosein
Effect of Solution Treatment on the Microstructure of γ' Precipitates in the IN738LC Superalloy Before and After Aging [Volume 1, Issue 2, 2017, Pages 99-108]
-
Razavi, Seyed Hosein
Effect of Solution Heat Treatment Media on Microstructure and Hardness of Ni-Base Superalloy IN738LC [Volume 2, Issue 3, 2018, Pages 161-179]
-
Razavi, Seyed Hosein
The Effect of Cooling Rate and Cryogenic Treatment on Microstructure and Hardness of IN738LC Cast Superalloy after Full Solution Annealing [Volume 3, Issue 1, 2019, Pages 45-52]
-
Razavi, Seyed Hosein
The Effect of Cryogenic Treatment on the Rejuvenation of Exposed IN738LC Gas Turbine Blade [Volume 3, Issue 3, 2019, Pages 163-174]
-
Razavi, Seyed Hosein
Effect of Remelting and Standard Heat Treatment on Microstructure and Mechanical Properties of IN738LC Superalloy [Volume 4, Issue 2, 2020, Pages 99-109]
-
Rezaei, Hossein
Evaluation of the Effect of Heat Treatment on Structural Changes and Mechanical Properties of Ti-48Al-2Cr-2Nb Intermetallic [Volume 6, Issue 2, 2022, Pages 125-132]
-
Rezaeian, S. Mohammad
Energy Management in Steelmaking by Electric Arc Furnace Based on OLTC [Volume 4, Issue 1, 2020, Pages 51-67]
-
Rezaie, Amir
Correlation of Microstructure, Hardness and Wear Resistance of Aluminum 3000 Series with Li Additive Fabricated by Horizontal Centrifugal Casting Method [Volume 2, Issue 4, 2019, Pages 239-249]
S
-
Saadati, Ahmad
A review on the investment casting process in the arts and jewelry industries [Volume 5, Issue 2, 2021, Pages 139-159]
-
Saboori, Abdollah
The effect of surface severe plastic deformation on microstructure and mechanical properties of pure titanium produced by selective laser melting [(Articles in Press)]
-
Sadeghi Mohammadi, Mohsen
Determination of Critical Pressure and Impeding Pressure for Manganese Evaporation During the Induction Melting Process of Manganese-Nickel Alloys [Volume 3, Issue 2, 2019, Pages 67-74]
-
Sadrossadat Zadeh, Seyed Mohsen
Effect of Slope Casting Parameters on the Microstructure and Mechanical Properties of AXE622 Alloy [Volume 6, Issue 2, 2022, Pages 103-112]
-
Safaei, Mir Saeed
Semi-Solid Rheocasting of Al-5Cu-1Ag High Strength Alloy [Volume 1, Issue 3, 2018, Pages 193-200]
-
Safaei, Mir Saeed
Investigation of Microstructure and Chemical Composition of Mg-Ag-Ce-Zr Cast Alloy (QE22) [Volume 3, Issue 4, 2020, Pages 237-245]
-
Saffari, Elaheh
An Investigation on the Effect of Chill Modification on Microstructure and Quality Index of Al-15Mg2Si Composite [Volume 4, Issue 2, 2020, Pages 79-87]
-
Saghafian Larijani, Hassan
Evaluation of the Microstructure and Wear Properties of A356/Al2O3 Nanocomposite Produced by Stir Casting Method [Volume 1, Issue 1, 2017, Pages 59-68]
-
Saghafian Larijani, Hassan
Effect of Immersion Time and Temperature on the Interface Characteristics of Pure Aluminium and Plain Carbon Steel [Volume 2, Issue 1, 2018, Pages 55-69]
-
Saghafian Larijani, Hassan
Effect of Calcium on Oxidation Resistance and Fluidity of Magnesium Alloy AZ91 [Volume 2, Issue 3, 2018, Pages 193-200]
-
Saghafian Larijani, Hassan
Comparison of Wear Behavior of Ductile Iron in Austempered and Quenched-Tempered Conditions [Volume 3, Issue 3, 2019, Pages 141-150]
-
Saghafian Larijani, Hassan
Investigating the Effect of Rapid Heating on Microstructure and Tensile Properties of Phosphorus Modified Alloy Al-Si-Cu-Mg [Volume 4, Issue 2, 2020, Pages 71-78]
-
Saghafi Yazdi, Morteza
Investigation of Effect of Mechanical Vibration During Solidification on Microstructure and Wear Properties of Zn-4Si Composite [Volume 6, Issue 1, 2022, Pages 53-65]
-
Saghafi Yazdi, Morteza
Investigation of Effect of Mold Mechanical Vibration During Solidification on the Structure and Corrosion Resistance of Zn-4Si Alloy [Volume 6, Issue 2, 2022, Pages 157-167]
-
Sajjadi, Seyed Meysam
The Effect of CeO2 and Hf Additives as a Grain Refinement on the Microstructure and Hardness of Austenitic Manganese Steel [Volume 5, Issue 3, 2021, Pages 165-174]
-
Salehi, Ali
Microstructure Characterization and Creep Behavior on the Casting CMM88Y Super Alloy turbine Blade [Volume 6, Issue 2, 2022, Pages 113-124]
-
Salehi, Maryam
Microstructure and mechanical properties of Al 5083 alloy produced by rapid solidification [Volume 5, Issue 1, 2021, Pages 1-8]
-
Samadi, Ahad
The Effect of Silicon Content on the Graded Microstructure of Centrifugally Cast Al-Si Alloys [Volume 1, Issue 2, 2017, Pages 89-97]
-
Samadi, Ahad
Establishment of Graded Hybrid Microstructure Through Centrifugal Casting of a Hypereutectic Al-Mg2Si Alloy [Volume 2, Issue 2, 2018, Pages 79-88]
-
Samadi, Ahad
Effect of Magnesium Content on Functionally Graded Microstructure and Hardness of Centrifugally cast Al-20Si-XMg Composites [Volume 3, Issue 2, 2019, Pages 55-66]
-
Samiee, Mohsen
The Effect of Cooling Rate and Cryogenic Treatment on Microstructure and Hardness of IN738LC Cast Superalloy after Full Solution Annealing [Volume 3, Issue 1, 2019, Pages 45-52]
-
Samiee, Mohsen
The Effect of Cryogenic Treatment on the Rejuvenation of Exposed IN738LC Gas Turbine Blade [Volume 3, Issue 3, 2019, Pages 163-174]
-
Sanjari, Alireza
Effect of Sample Diameter and Withdrawal Rate on Microstructure and Hot Tensile Behavior of Directionally Solidified PWA 1483 Superalloy [Volume 3, Issue 3, 2019, Pages 175-185]
-
Seifollahi, Masoumeh
Evaluation of the Effect of Carbon and Solution Treatment on the Microstructure and Mechanical Properties of ASTM F75 Cast Co Based Alloy [Volume 6, Issue 1, 2022, Pages 35-44]
-
Seifollahi, Masumeh
Effect of Melt Holding Time on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 3, Issue 1, 2019, Pages 29-36]
-
Seifollahi, Masumeh
Effect of Carbon Content on the Microstructure and Mechanical Properties of Hyness 25 Superalloy [Volume 4, Issue 3, 2020, Pages 137-143]
-
Seifollahi, Masumeh
Effect of Crucible Type on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 6, Issue 1, 2022, Pages 3-8]
-
Seifollahi, Masumeh
The Effect of Melt Holding Time and Vacuum Pressure on the High Temperature Fatigue Life of Ni Based Hastelloy X Superalloy [Volume 5, Issue 3, 2021, Pages 205-213]
-
Seifollahi, Masumeh
Effect of Solutionizing Heat Treatment Duration on the Microstructural Defects of CMSX-4 Single Crystal [Volume 6, Issue 2, 2022, Pages 143-155]
-
Seifollahi, Masumeh
Effect of withdrawal rate of directional solidification on the microstructure of a new Cobalt-Nickel based Superalloy [(Articles in Press)]
-
Seyedraoufi, Zahra Sadat
Effect of Solution Treatment on the Microstructure of γ' Precipitates in the IN738LC Superalloy Before and After Aging [Volume 1, Issue 2, 2017, Pages 99-108]
-
Seyedraoufi, Zahra Sadat
The Effect of Cooling Rate and Cryogenic Treatment on Microstructure and Hardness of IN738LC Cast Superalloy after Full Solution Annealing [Volume 3, Issue 1, 2019, Pages 45-52]
-
Seyedraoufi, Zahra Sadat
The Effect of Cryogenic Treatment on the Rejuvenation of Exposed IN738LC Gas Turbine Blade [Volume 3, Issue 3, 2019, Pages 163-174]
-
Seyedraoufi, Zahra Sadat
Effect of Remelting and Standard Heat Treatment on Microstructure and Mechanical Properties of IN738LC Superalloy [Volume 4, Issue 2, 2020, Pages 99-109]
-
Seyedraoufi, Zahra Sadat
The Effects of Cooling Rate after Solutionizing on the Microstructural Evaluation of Cast IN718 Superalloy during Long-Term Thermal Exposure [Volume 4, Issue 3, 2020, Pages 175-184]
-
Seyedraoufi, Zahra Sadat
Investigation of AISI 321/Al interface in compound casting at 840 °C [(Articles in Press)]
-
Seyedraoufi, Zahra-Sadat
Effect of Solution Heat Treatment Media on Microstructure and Hardness of Ni-Base Superalloy IN738LC [Volume 2, Issue 3, 2018, Pages 161-179]
-
Shabestari, Saeed
Investigation on the Effect of Solidification Parameters on Microstructural Characteristics and Hardness of Al-Fe Alloy Produced by Directional Solidification in Bridgeman Furnace [Volume 1, Issue 1, 2017, Pages 1-8]
-
Shabestari, Saeed
Effect of Semi-Solid Rotating Container Process on Characteristics of Solidification, Dendrite Coherency and Microstructure of AZ91 Magnesium Alloy [Volume 2, Issue 3, 2018, Pages 135-146]
-
Shabestari, Saeed
The Effect of Inert Gas Injection Semisolid Process on the Structure and Hot Tearing Susceptibility of Al-4.3%Cu Alloy [Volume 3, Issue 1, 2019, Pages 1-10]
-
Shabestari, Saeed
Investigation on Effects of Melt Temperature on Solidification Behavior of in-situ Al-Mg2Si Composite using Cooling Curve Thermal Analysis [Volume 4, Issue 1, 2020, Pages 1-9]
-
Shaeri, Mohammad Hossein
Effect of Severe Plastic Deformation on Mechanical Properties and Microstructure of A520 Al-Alloy Produced by Semisolid and Ordinary Casting [Volume 1, Issue 1, 2017, Pages 9-21]
-
Shafie Farhoud, Amir Hassan
An Investigation on Reduction of Insoluble Build-ups in the Inductor of Ductile Iron Pouring Machine [Volume 2, Issue 2, 2018, Pages 101-108]
-
Shahmiri, Mohammad
Investigation of Oxide Film Characteristics in Al-Zn Melt by Oxide-Metal-Oxide Technique [Volume 3, Issue 3, 2019, Pages 131-140]
-
Shahrokhian Dehkordi, Mohammad Amin
Experimental Investigation of Effective Parameters on Gas Exhaust from the Mold in Lost Foam Casting Method [Volume 1, Issue 3, 2018, Pages 161-170]
-
Shajari, Yazdan
Effect of Solution Treatment on the Microstructure of γ' Precipitates in the IN738LC Superalloy Before and After Aging [Volume 1, Issue 2, 2017, Pages 99-108]
-
Shajari, Yazdan
Effect of Solution Heat Treatment Media on Microstructure and Hardness of Ni-Base Superalloy IN738LC [Volume 2, Issue 3, 2018, Pages 161-179]
-
Shajari, Yazdan
The Effect of Cryogenic Treatment on the Rejuvenation of Exposed IN738LC Gas Turbine Blade [Volume 3, Issue 3, 2019, Pages 163-174]
-
Shajari, Yazdan
Effect of Remelting and Standard Heat Treatment on Microstructure and Mechanical Properties of IN738LC Superalloy [Volume 4, Issue 2, 2020, Pages 99-109]
-
Shakeri, Bahram
Investigation of Microstructure and Hardness of upper Bainitic Austempered Aluminum Ductile Iron (Fe-3.4C-4.3Al-Mg) [Volume 3, Issue 2, 2019, Pages 75-90]
-
Shamsian Jeze, Mahya
Effect of Solution Cooling Rate on Microstructure and Hardness of X-750 Superalloy [Volume 4, Issue 3, 2020, Pages 145-153]
-
Sharifi, Ali
Comparison of Wear Behavior of Ductile Iron in Austempered and Quenched-Tempered Conditions [Volume 3, Issue 3, 2019, Pages 141-150]
-
Sharifi, Hassan
Experimental Investigation of Effective Parameters on Gas Exhaust from the Mold in Lost Foam Casting Method [Volume 1, Issue 3, 2018, Pages 161-170]
-
Sohrabi, Mohammad Javad
Calculating the Elemental Diffusivities During Homogenization of as-cast Inconel 718 Superalloy [Volume 3, Issue 3, 2019, Pages 123-129]
-
Soltanieh, Mansour
Investigating of Wettability Modification Methods on Microstructure and Mechanical Properties of Silicon Carbide/ Aluminum Composite Produced by Stir Casting [Volume 3, Issue 1, 2019, Pages 21-28]
T
-
Tabatabaei Rezaei, Nima
Investigating the Effect of Rapid Heating on Microstructure and Tensile Properties of Phosphorus Modified Alloy Al-Si-Cu-Mg [Volume 4, Issue 2, 2020, Pages 71-78]
-
Taghiabadi, Reza
An Investigation on the Effect of Mn on the Castability of Hypoeutectic Al-2Ni-xMn Alloys [Volume 1, Issue 2, 2017, Pages 69-78]
-
Taghiabadi, Reza
Effect of Modifier Elements on Quality Index Improvement of A356 Aluminum Alloy Before and After T6 Heat Treatment [Volume 2, Issue 1, 2018, Pages 11-25]
-
Taghiabadi, Reza
Investigation of the Effect of Copper on Microstructural Modification and Quality Index of Al-15Mg2Si Composite [Volume 3, Issue 4, 2020, Pages 217-227]
-
Taghiabadi, Reza
An Investigation on the Effect of Chill Modification on Microstructure and Quality Index of Al-15Mg2Si Composite [Volume 4, Issue 2, 2020, Pages 79-87]
-
Taghiabadi, Reza
Effect of Si on Castability of Al-Cu-Si Alloys [Volume 4, Issue 4, 2021, Pages 215-226]
-
Taghiabadi, Reza
Investigation of microstructure and mechanical properties of Al-2Ni-xMn alloys as substitute for hypoeutectic Al-4Ni alloy [Volume 5, Issue 1, 2021, Pages 51-62]
-
Taghiabadi, Reza
Investigation of Effect of Mechanical Vibration During Solidification on Microstructure and Wear Properties of Zn-4Si Composite [Volume 6, Issue 1, 2022, Pages 53-65]
-
Taghiabadi, Reza
Investigation of Effect of Mold Mechanical Vibration During Solidification on the Structure and Corrosion Resistance of Zn-4Si Alloy [Volume 6, Issue 2, 2022, Pages 157-167]
-
Taghiabadi, Reza
An investigation on the effect of grain refinement on the fluidity and hot tearing susceptibility of Ce-modified 2024 Al alloy [(Articles in Press)]
-
Taghiabadi, Reza
The effect of surface severe plastic deformation on microstructure and mechanical properties of pure titanium produced by selective laser melting [(Articles in Press)]
-
Taheri, Nader
Investigation of Oxide Film Characteristics in Al-Zn Melt by Oxide-Metal-Oxide Technique [Volume 3, Issue 3, 2019, Pages 131-140]
-
Taherimanesh, Faeze
Effect of Stirring Temperature on the Morphology of Primary Si Particles, Hardness and Wear Behavior of Al-20wt.%Si Alloy Prepared by Semi-Solid Stir Casting [Volume 3, Issue 3, 2019, Pages 151-162]
-
Tavakoli, Rouhollah
Production and Characterization of SAC-xAl Lead Free Nanocomposite Solder via Melt-Spinning Technique [Volume 1, Issue 3, 2018, Pages 171-180]
-
Tavakoli, Rouhollah
Numerical simulation of solidification microstructure in selective laser melting additive manufacturing and studying the effect of process parameters on grains morphologies [Volume 3, Issue 4, 2020, Pages 229-236]
-
Tavakoli, Rouhollah
Optimum design of sprue well using computer simulation and experimental study [Volume 4, Issue 2, 2020, Pages 119-126]
-
Torabi, Mehran
Effect of Inoculation and Casting Modulus on the as Cast Microstructure of Austenitic Manganese Iron with Nodular Graphite [Volume 5, Issue 1, 2021, Pages 19-30]
-
Torabi, Seyyed amin
Effect of Shot-Peening on the Wear Behavior of Two Types of High Manganese Austenitic Steel [Volume 1, Issue 2, 2017, Pages 121-132]
-
Torfeh, Maryam
Investigation of Heat Transfer Coefficients Effects in Directional Solidification of GTD111 Super-alloy [Volume 3, Issue 1, 2019, Pages 11-20]
-
Torfeh, Maryam
Investigation of the effect of misorientation grain growth on the creep behavior of nickel-based GTD111DS superalloy [Volume 5, Issue 2, 2021, Pages 79-92]
-
Torkamani, Shahin
Evaluation of the Effect of Carbon and Solution Treatment on the Microstructure and Mechanical Properties of ASTM F75 Cast Co Based Alloy [Volume 6, Issue 1, 2022, Pages 35-44]
-
Tutunchi, Abolfazl
Comparison of Ti and Nb Microalloy Addition on the Microstructure and Mechanical Properties of a Quenched-Partitioned Cast Steel [Volume 5, Issue 1, 2021, Pages 31-40]
V
-
Vahdat, Seyed Ebrahim
Evaluation of Microstructure, Physical and Mechanical Properties of Functionally Graded Al-Cu Fabricated by Horizontal Centrifugal Casting [Volume 1, Issue 1, 2017, Pages 47-58]
-
Vahdat, Seyed Ebrahim
Properties of SAE660 Bronze Bearing at Four Different Casting Conditions [Volume 2, Issue 2, 2018, Pages 89-100]
-
Vahdat, Seyed Ebrahim
Correlation of Microstructure, Hardness and Wear Resistance of Aluminum 3000 Series with Li Additive Fabricated by Horizontal Centrifugal Casting Method [Volume 2, Issue 4, 2019, Pages 239-249]
-
Vahdati-Khaki, Jalil
Design of Refractory High-Entropy Alloys to Reduce Weight and Cost [Volume 4, Issue 3, 2020, Pages 167-173]
-
Varahram, Nasser
The Effect of Precipitation Hardening on Microstructural Characteristics of Directionally Solidified Nickel-Based Superalloy GTD-111 [Volume 1, Issue 2, 2017, Pages 109-120]
-
Varahram, Nasser
The Effect of Withdrawal Rate on the Microstructure of Ni-based Superalloy GTD-111 through the Directional Solidification [Volume 4, Issue 4, 2021, Pages 237-246]
Y
-
Yari Dehkaboudi, Ali
Optimum design of sprue well using computer simulation and experimental study [Volume 4, Issue 2, 2020, Pages 119-126]
-
Yazdi, Ashkan
Effect of Austempering Time and Temperature on the Microstructure and Hardness of Bainitic Silicon Steel [Volume 1, Issue 2, 2017, Pages 79-87]
-
Yousefi, Dorsa
Non-linear Standard Model for Optimization of Charge Materials in Crucible and Induction Melting Furnaces [Volume 5, Issue 2, 2021, Pages 107-118]
-
Yousefi, Fatemeh
An Investigation on the Effect of Mn on the Castability of Hypoeutectic Al-2Ni-xMn Alloys [Volume 1, Issue 2, 2017, Pages 69-78]
-
Yousefi, Fatemeh
Investigation of microstructure and mechanical properties of Al-2Ni-xMn alloys as substitute for hypoeutectic Al-4Ni alloy [Volume 5, Issue 1, 2021, Pages 51-62]
-
Yousefi Bonab, Seyyed Sadra
Semi-Solid Rheocasting of Al-5Cu-1Ag High Strength Alloy [Volume 1, Issue 3, 2018, Pages 193-200]
-
Yousefi Bonab, Seyyed Sadra
Investigation of Microstructure and Chemical Composition of Mg-Ag-Ce-Zr Cast Alloy (QE22) [Volume 3, Issue 4, 2020, Pages 237-245]
-
Yousefpuor, Daniel
Effect of Manganese Content on the as Cast Microstructure of Nodular Cast Iron [Volume 4, Issue 4, 2021, Pages 203-213]
Z
-
Zahiri, Hadi
Effect of Slope Casting Parameters on the Microstructure and Mechanical Properties of AXE622 Alloy [Volume 6, Issue 2, 2022, Pages 103-112]
-
Zamani, Mohammad Reza
Effect of Carbon Content on the Microstructure and Mechanical Properties of Hyness 25 Superalloy [Volume 4, Issue 3, 2020, Pages 137-143]
-
Zandi, Mohsen
Effect of Stabilized Zirconia Oxide by Y2O3 and Silicon Carbide on Physical Stability of Magnesite Based Refractories [Volume 6, Issue 1, 2022, Pages 45-51]
Your query does not match with any item